tub resurfacing fumes apartment (2023)

pearland water bill payment

I cant tell you how many times Ive told others in the field that are doing this to make sure they have more ventilation and to remove or re-coat the tube out of the bathroom and to at least not to do it without the proper breathing apparatus. The standard also sets a 12.5 ppm action level (AL) which triggers periodic monitoring and medical surveillance provisions. CDC twenty four seven. Keep posting at all like me gonna turned up at write out paper everyday! Even if you hire a professional, let the area air out and keep it ventilated after the work is complete until you can no longer detect any unusual or chemical odors. Ive spoken with many other tub resurfacing company owners and employees, and most of them do not use or even own full-face air-supplied respirators. NYC Renovation Chronicles: 5 ways to save on your bathroom renovation, Renovating a co-op? These comments do not represent the official views of CDC, and CDC does not guarantee that any Thanks for your comment. Thank you so much! Thank you for spreading the word on the importance of this! They agreed to resurface it for me as they would not replace it. Some will work but they require 24 hours of wet saturation and even then they require a lot of hard work. I am concerned about having a surface that is toxic and that can harm my family in the long run. Dust masks do not protect you from bathtub refinishing vapors. To ensure their safety, the employees should have left the room immediately after applying the methylene chloride-based stripping agent to limit exposure to methylene chloride vapors. Also, you may want to ask the installer for the products safety data sheet which may have useful information on curing times and precautions. It smelled awful for days. Also you should understand between difference between Refinishing (without removing the old layer first) and Reglazing (stripping off the previous coating and sanding down the tub) a Bathtub. Winter renters lose leverage, questions for condo and co-op buyers, & more, The allure of tax abatements, a Chelsea affordable housing lottery, & more, Co-ops may have some 'splaining to do, renting a penthouse, & more. The paint in the bath tub is pealing off after one use. This forces a refinisher to use a very strong stripper. Note that humidity affects both dry time and how well the topcoat bonds to the surface, so the cool, less-humid seasons of fall or spring providethe best conditions for this type of work. NIOSH has continued to try to get the word out to workers and employers about the risks of working with methylene chloride. I would really like some reassurance. The most dangerous part of the bathtub refinishing process is inhaling the fumes associated with the job. Last night I went to bed with a headache, then vomited on and off throughout the night. We sure take a lot things for granted. I was weak though and shaking, felt faint and nauseated. I had no problems with it and thought they knew what they were doing as it happens all the time here. I guess this is one of those occupational hazard jobs when doing bathtub refinishing. Im going to book mark your blog and keep checking for new information about once per week. It a huge peeled off spot in the tub, dangerous to me? We were told when we did it that it only lasts about five years and I'm finding that to betrue, she says. And Bathtub Aliphatic Acrylic Urethane MSDS. Follow the links to the Material Data Safety Sheet (MSDS) that the search will find. http://retrorenovation.com/2016/05/02/understanding-potential-lead-hazards-old-porcelain-enamel-bathtubs-sinks-ceramic-tile-any-age/#ixzz47UvHcM00. I think this post was very helpful in knowing the bad effects of such dangerous products. See the NIOSH topic page dedicated to occupational safety and health hazards associated with Isocyanates (http://www.cdc.gov/niosh/topics/isocyanates/default.html). The prep is the most important part of the job, says White. Our apartment filled with these toxic fumes. Provide local exhaust ventilation (LEV) and fresh makeup air to exhaust vapors released from the stripping agents in the bathtub. Its in our best interest to devise a way to remove these coatings without harming ourselves or the environment. With just a day or two of work, reglazing the centerpiece of your bathroom with a durable coating and color is an easy way to give your tub a quick facelift without breaking the bank. Your local health department may also be able to provide more assistance or information. Lowering exposures, even below the PEL, is considered to be good industrial hygiene practice. Contact Us Today For A Free Bathtub Refinish Estimate Call [phone] or complete the contact form below for a FREE estimate! A bathtub replacement can cost around $2,900 on average and may add value to your property. The bathroom was small, and the door was closed due to restricted access to the bathtub. I am all for saving money and dont wish to come off like I dont appreciate the effort but if your already saving $5000 why not let a pro do it. I very much agree with you, that safety and health is a very important thing in our lives, My apartment is very small and I sat in bedroom with my elderly cat not 20 feet away. This bathtub renovation option goes by many names resurfacing, recoating, refinishing or reglazing but has a pretty straightforward process. The whole job will take around 5 hours after which you will have a reglazed bathtub. So, once workers can smell methylene chloride they are already being overexposed. My friend was left to work alone in the small enclosed space, with out supervision. They help us to know which pages are the most and least popular and see how visitors move around the site. Ron, I have a similar question to the one already asked. loss or damage resulting from reliance on any such information. Bathtub Reglazing Experts. Thank you! Will these chemicals be leaching out of the surface, presenting a health concern from contact? Can you give me any help in researching to determine if the polyurethane/acrylic finishes leaches? You should ask the installer to check that the product was applied correctly. Technicians have been properly trained to do this type of work. After doing research on reglazing chemicals typically used for bathtubs, we found that it's strongly suggested to (1) not be in the home for at least 48 hours after the reglazing and (2) that leaving windows open is not enough, but you must bring in some kind of ventilation gear such as hurricane fans or powered tubing to clear the area out . An apartment maintenance man entered the apartment to look for the man and found him behind the closed bathroom door, unresponsive, and slumped over the tub. These cookies allow us to count visits and traffic sources so we can measure and improve the performance of our site. Bathtub refinishing fumes are dangerous and you do not want yourself or anyone in the home breathing them. Care must be taken to ensure that workers are not overexposed to particulates being generated during sanding operations. And, are there any substances that are dangerous and can later leach into bath water and be absorbed by the skin? Step 2: Clean the Tub Thoroughly Step 3: Protect Areas Around the Tub Step 4: Remove the Glaze Step 5: Sand the Surface Step 6: Prep the Surface for Glaze Application Look for an alternative to do the bathtub refinishing. The process commonly involves removing the bathtub's existing finish before applying a new coating, usually a synthetic finish such as polyurethane or epoxy. I already have cancer, my throat was raw and I had a headache. As far as we are concerned, 2k urethane systems should not be allowed in residential use. The health issues that you can face immediately and also in the future are not worth the risk. Like many cancer-causing agents, any level of exposure, even concentrations below applicable occupational exposure limits, may pose a residual cancer risk. Its also useful to mention that there are different types of chemicals which use MC as an active ingredient. Scratching the tub would not release any methylene chloride vapors. Today, my apartment filled with fumes, and I feel sick. Cookies used to enable you to share pages and content that you find interesting on CDC.gov through third party social networking and other websites. a great article! TENANT INSTRUCTIONS: . We will never promote an advertiser's product without making the relationship clear to our readers. Its better not to use methylene chloride for the safety of everybody. ive found a majority of the time the diy kits people use never adhere well. We had one bathtub redone in our old house a few years ago but I think they just re-coated it. Thank you for your comment. I have read many articles but this is different one. Methylene chloride is a volatile liquid and would fully evaporate shortly after a project is completed. It is an odd sized bathtub so I did not even consider ordering a replacement custom-made. We face inspections every year where lots of tubs are refinished in this building.but no precautions are ever taken to protect the residents and their animals. Im 70 and have no place to go except my apartment. I also had diarrhea several times this morning. Usually coatings can be removed with a good razor scraper.sure it takes longer but it keeps me from using more harmful chemicals. Thanks for sharing such a helpful post. ), [Its] a great way to make a grimy, stain-ridden bathtub look new again, says Dan DiClerico, HomeAdvisor'ssmart home strategistand home expert. These are classified as potential human carcinogens according to the U.S. Department of Labor, and protective gear should be worn when working with them. document.getElementById( "ak_js" ).setAttribute( "value", ( new Date() ).getTime() ); To receive email updates about this page, enter your email address: We take your privacy seriously. After a few years, she was diagnosed with lung cancer (she never smoked) and died in 1999. What is this stuff? Thanks for your comment. When I smell the tiles I can not smell anything but with my nose close to the bathtub I can smell a sweetish sour chemical smell. Seek medical attention for treatment and evaluation. thank you. It seemed like this article focused more on the concerns of MC and not ISO is there a follow up article that is just based on Isocyantes? *By signing up you agree to receive occasional emails on behalf of our sponsors, Copyright 2009-2022 by BrickUnderground | PrivacyPolicy | TermsofService | AdChoices | Login, National Association of Real Estate Editors. Jimmy White of Staten Island-based Custom Spraying and Reglazing, who has been doing it for more than 30 years and is considered the reglazer to the starsheworked on Faye Dunaway's and Candace Bergens bathroomssays it can be done in a few hours, plus 24 hours of dry time. Bathtub refinishing is a necessary maintenance step if you wish to improve the appearance and structural integrity of your tub. We are inconsolable. Just trying to speak up for low income and maybe other apartment dwellers too. Now its already peeling. For consumer-related questions after the tub has been refurbished, please contact the Consumer Product Safety Commission. Since Bathtub Refinishing can also be a consumer issue, another potential resource is Product Safety Australia http://www.productsafety.gov.au. Your email address will not be published. If the room where it was used is flushed with fresh air, perhaps by using a small fan, it is unlikely that any methylene chloride will be present or continue to leech out days after the re-glazing was done. That is a shocking statistic, At least 14 workers have died since 2000 as a result of using stripping agents containing methylene chloride during bathtub refinishing. NIOSH work in this area only pertains to workers exposed when using stripping agents containing methylene chloride during bathtub refinishing. The nearby exterior door was open for ventilation and the overhead fan was blowing and although they had a pipe going from the bathroom down the hall and out the front door this was not sufficient. After the bathtub has been stripped and resurfaced how long is the danger from the Methylene chloride still in the air? thank you so much. Alternatively, you can search on Methylene Chloride and Safety Data Sheet for a listing of various SDSs for similar products. This may sound extreme, but I assure you, neglect to safety is not worth the life of a co worker, family member, or in my case a best friend. But because were low income, we also do not get the luxury of telling management or housingno. If you feel you are in danger, you should contact your local emergency services for assistance. keep blogging~! In workers with heart disease, an increase in carbon monoxide may lead to early onset heart attacks and arrhythmias (irregular heartbeats). My concern is whether it is safe to take long soaks in this tub. What is the difference between a muntin and a mullion and are they still used in windows? Using methylene chloride products in a bathroom is extremely dangerous as bathrooms are often small, enclosed spaces with little or no ventilation. We need to know what all are used while doing refinishing. This is poor. You also want to keep shampoo bottles and other products off the surface, aswell as a mat with suction cups. So, if the concentration were over the PEL, for example at 50 ppm, the workers would exceed the 25 ppm average limit in 4 hours.

Judge Mccann St Lucie County,How Long Does Royal Mail Tracked 48 Take,Monkey And Tiger Friendship Compatibility,Fair Play Cards Printable,Articles T